How I Achieved Maximum Success with Installations

4 Steps Of Doing Hardwood Floor Refinishing Homeowners need to know that together with planning and patience and skill, they ought to have specialized equipment as well when considering hardwood floor refinishing. Out of all the home improvement projects that homeowners can undertake, this one is something that requires research, knowledge and time. You will go through different steps or stages that include preparing, evaluating, sanding as well as sealing your hardwood floors. In any of the said stages or steps, even a slight touch of error is enough to cause problems that can last for a long time. It is possible that you can perform the refinishing of the hardwood flooring alone but it is suggested that you also get some help. It takes 1 to 3 weeks to carry out refinishing for such type of flooring. Step 1. Checking the hardwood floor – you’ll have to determine whether or not the hardwood floor planks will be a laborious process. You need to evaluate if the floor suffered from water, pet urine or spills. You may pull up one threshold of the door in order to see if the boards are so thin to be sanded. Additionally, you need to figure out if the last sealant was varnish, wax or polyurethane. Of course, to know if the hardwood flooring have deep gouges or dramatic wear patters, you’ve got to give it a thorough examination.
Why No One Talks About Resources Anymore
Step 2. Preparing the flooring – before you do hardwood floor refinishing, you must prepare the flooring first. You’re all set to start with the preparation in case that most hardwood planks don’t have scratches or holes, are at least 3/4 inches thick and have same amount of sealant.
Smart Tips For Uncovering Resources
Cleaning the whole floor area is the first thing that you’ve got to do. It is vital as well to file holes from nails, staples or scrapes. You need to pull up the thresholds as well as the baseboards too. Even if one of the floors does not look good, still you need to do all the flooring to maintain consistency. Step 3. Sanding – probably, this is the most daunting and demanding step that you will ever do. You need to rent a drum sander equipment, this is loud to use and you’ve got to roll it to the entire hardwood flooring 3x to be able to peel off the top layer of the finish. Step 4. Staining and sealing – just before you start with this step, you must ensure that every bit of sawdust is gone so it doesn’t contaminate the sealing and staining applications. You need to seal it with thin layer of sealant to be certain that the stain is dry before application once you are done staining the flooring.